Register




Post Reply 
Reading and clearing errors
12-17-2015, 06:20 AM (This post was last modified: 12-17-2015 09:26 AM by betteplace.)
Post: #1
Reading and clearing errors
I've got the infamous 'Electrical fault - Danger!' error
Followed up by battery can't be charged and check cruise control.

When I read out DTC with the CanZE app I see that Battery Connection Box is status 'failed since clear'.

Unfortunately the app can't clear the error, probably due to me not knowing how to get the car into service mode.
1 Does anyone know how to enable service mode on a Fluence?
2 Does anyone know of other OBDII apps that can read and clear errors on a Fluence?

Hoping for inspiration


Henrik
Fluence 2013, 20.000 km
Find all posts by this user
Quote this message in a reply
12-17-2015, 07:56 PM
Post: #2
RE: Reading and clearing errors
To save others the hasstle: These apps does not appear to be able to read out errors form a Fluence:

Torque lite
OBD Car Doctor free
Smart Control Free
EOBD Facile
Carista
DashCommand
Piston
ScanMaster
Bluedriver
OBDLink

I'll keep trying a while
Find all posts by this user
Quote this message in a reply
12-18-2015, 07:00 AM
Post: #3
RE: Reading and clearing errors
hello . i got one delphi system to read all faults and config. this option.. but im at cardiff..
if you like .. can meet.
Find all posts by this user
Quote this message in a reply
12-19-2015, 01:57 PM
Post: #4
RE: Reading and clearing errors
IF it is THE fault that several owners experienced, then it's no use to clear it at all. If will return cause there is a loss of isolation from the motor brushes to chassis potential - which needs to be fixed.

You can try to dry out the motor as well as possible (worked for me), then it may reset so you can give it a full charge at least. Then you should see the dealer and have him checked the car, and possibly exchanged the motor under warranty.


Regards,
Beat

P.S.: Your Mileage is typical for THE fault.
Find all posts by this user
Quote this message in a reply
01-13-2017, 10:18 PM
Post: #5
RE: Reading and clearing errors
(12-17-2015 07:56 PM)betteplace Wrote:  To save others the hasstle: These apps does not appear to be able to read out errors form a Fluence:

Torque lite
OBD Car Doctor free
Smart Control Free
EOBD Facile
Carista
DashCommand
Piston
ScanMaster
Bluedriver
OBDLink

I'll keep trying a while

Have you found app that is working for Fluence ZE?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump: